The brand code you entered may only offer partial compatibility. Repeat the programming process using a different code from the list.
Replace both AA batteries. Ensure they are inserted correctly matching the (+) and (-) polarities inside the battery compartment. Weak batteries may have enough power to light up a button but not enough power to transmit an IR signal. 3. Only certain buttons work for programmed devices
To program the remote to control other components (like a TV), use the following steps: Enter Programming Mode : Simultaneously press and hold the desired REMOTE MODE button and the
The RC-799M features a "plug-and-play" setup. Most retail sellers are third-party manufacturers, so the packaging may look different, but the setup is standard. To get started:
To control external devices like a Samsung TV, Apple TV, or Sony Blu-ray player, you must program a 5-digit remote control code into the corresponding button. Step-by-Step Programming Instructions onkyo rc-799m remote manual
If your remote control stops working or responds intermittently, try these troubleshooting steps: 1. The Remote Does Not Operate Your Onkyo Receiver
: Ensure you are using 2 AAA batteries . Most replacement versions of this remote do not require programming for the Onkyo receiver itself; they work "out of the box."
: Press and hold the REMOTE MODE button (e.g., TV, BD/DVD) while also holding the DISPLAY button for about 3 seconds . The Remote indicator/mode button should light up.
While holding down Power, press and hold the button. Keep both buttons held down for roughly 5 seconds. The brand code you entered may only offer
Select a preset FM station:
The is a versatile unit. It comes with many Onkyo AV receivers [3].
: Aim the remote at your device and press the Power button to see if it responds.
If the remote is acting erratically, or if you want to wipe out all custom device programming to start fresh, you can perform a hard reset. Press and hold the button. Ensure they are inserted correctly matching the (+)
using the number buttons within 30 seconds.
Because the devices are linked via the RI cable, commands sent to the receiver are automatically passed through to the connected Onkyo components. 6. Resetting the Remote to Factory Defaults
Onkyo AV receivers and home theater packages