Dx-ar-8108 Radio User Manual -

"—repeat, this is Dr. Aris from Bio-Weather Station 8108. The surface is not real above the 12th floor. Do not go higher than the 11th. Do not trust the sunrise. Do not—"

Once installed and powered on, take a few moments to configure your environment for optimal sound output. Setting the Clock

The receiver will automatically change sources to USB or CARD mode and begin reading the data. Dx-ar-8108 Radio User Manual

Turn clockwise to power on and increase volume. Turn counter-clockwise to decrease volume and turn off.

Note: Connecting the AC cord automatically disconnects the internal battery circuit to preserve battery life. Battery Power Operation "—repeat, this is Dr

Common issues and solutions:

Rotate the volume knob (usually central) to adjust levels (0-40). Do not go higher than the 11th

Built-in 10A or 15A blade fuse. If the unit does not power on, always check this fuse first. 4. First-Time Setup and Audio Settings

Press the Volume Knob repeatedly to cycle through the adjustable audio metrics. Rotate the knob to adjust the levels for each: Adjust low frequencies from -7 to +7. TRE (Treble): Adjust high frequencies from -7 to +7.

Connect the supplied AC power cord into the AC input jack on the side of the radio.