Easy Cycle Yj 1033 Manual – Must Read

The monitor on the tracks key metrics. Use the button on the console to toggle through the following: SCAN: Automatically cycles through all modes. TIME: Tracks how long you have been exercising.

: The right pedal screws in clockwise, while the left pedal screws in counter-clockwise (reverse threaded) to prevent loosening during use. Tension Control :

If the pedals feel hot after intense use, stop and let them cool down. Easy Cycle Yj 1033 Manual

For any questions or concerns, please contact our customer support team:

To clear the session data (Time, Distance, Count, and Calories) before starting a new workout, press and hold the button down for 3 to 5 seconds. The numbers on the screen will flash and return to zero. 4. Maintenance and Safety Best Practices The monitor on the tracks key metrics

Periodically check that the pedals and leg screws are tight.

Use a flat tool or a screwdriver to gently pry the digital screen module out of its plastic frame socket. : The right pedal screws in clockwise, while

Lesson one: Do not throw away the packaging until every bolt is tightened. Small parts love to hide in Styrofoam.

If the pedaling mechanism becomes noisy, a light machine oil can be applied to the joints. 4.2 Safety Precautions

This is a magnetic bike. It should be silent. If you hear a rubbing noise, the brake pad or magnet might be too close to the wheel even at the lowest setting. Unplug the tension cable slightly at the knob to give the wheel more room.