Hicam H6 Mini Dv Operating Manual

The HiCam H6 features a built-in rechargeable lithium battery. Connect the Micro USB cable to the camera.

The computer will automatically detect the device as a .

The indicator light will flash a specific sequence (often red and blue together) and then turn off.

The HiCam H6 supports loop recording by default. When the MicroSD card runs out of space, the camera automatically overwrites the oldest unprotected video files with new recordings. This ensures uninterrupted coverage. 5. Setting the Time & Date Stamp hicam h6 mini dv operating manual

Press and hold the Power button for 2–3 seconds. The indicator will light up (usually blue), indicating standby mode.

Changes modes and resets the device to factory settings.

Check the cable connection or ensure the power source is active. The HiCam H6 features a built-in rechargeable lithium

Press and hold the Power button for approximately 2–3 seconds. The indicator light will illuminate, signaling the device is in Standby Mode.

Open the "Removeable Disk" folder that appears on your computer.

Press and hold the Function button for about 2 seconds (or double-click, depending on the specific firmware variant). The indicator light will flash a specific sequence

The HiCam H6 features a built-in lithium-ion battery. For optimal performance, charge it fully before its first use. Connect the micro USB cable to the camera.

Basic operation Mode switching

The blue and red lights will flash together three times and then turn off.