V2ray Mikrotik !!hot!!

Once the container is downloaded, you must mount your config.json file into the container. This requires creating a directory on the router's file system and mounting it to /etc/v2ray/ inside the container.

By implementing V2Ray on MikroTik via Docker containers, you achieve a highly secure, fast, and transparent network environment. This setup allows you to leverage the full power of RouterOS while enjoying the benefits of modern, secure proxy protocols. If you'd like, I can:

: Container support is not available on RouterOS v6. v2ray mikrotik

You can also use your router as a V2Ray server to allow devices outside your home to securely connect back to it.

To set up V2Ray on a Mikrotik device, follow these steps: Once the container is downloaded, you must mount your config

Running V2Ray at the router level offers several key advantages:

Once the V2Ray container is running, it exposes a SOCKS5 proxy on 172.17.0.2 . Now we must tell MikroTik to send traffic through this proxy. /routing table add name=v2ray-table fib Use code with caution. This setup allows you to leverage the full

/ip/firewall/nat/add chain=dstnat protocol=tcp dst-port=80 action=redirect to-ports=8080 comment="Redirect HTTP to V2Ray Parent Proxy" Use code with caution.

/interface/bridge/add name=docker-bridge /interface/veth/add name=veth1 address=172.17.0.2/24 gateway=172.17.0.1 /interface/bridge/port add bridge=docker-bridge interface=veth1 /ip/address/add address=172.17.0.1/24 interface=docker-bridge Use code with caution. 3. Setup NAT and Firewall (Routing)